Filter
Top Products
Problems During Bootup
4-3
To restore the default configuration:
1
After powering on the system, hold down the space bar to prevent the system from
rebooting.
The Flash Utility screen displays.
2
Select 6. Utility Menu and press Enter.
The Utility Menu screen displays.
3
Select 2. Clear Configuration and press Enter.
4
The system confirms that you want to make the change. Enter Y to confirm and press
Enter to clear the configurations.
5
The system confirms that the changes are made.
6
Press q to quit the Utility Menu.
7
Select 5. Run Bridge to verify the configurations have been cleared.