Chaparral FS2620R Network Router User Manual


 
FS2620R Rack Model User’s Guide
I-4
R
rack, installing the router in 2-2
rebooting
problems during 4-1
the router 3-23
replacing the fuse 4-5
resolving addresses using ARP B-2
resolving addresses using DHCP B-2
restarting the router 3-23
Restore Defaults screen 3-23
restoring router configurations 4-2
restoring the default settings 3-23
router
benefits 1-2
changing the date 3-19
changing the initiator ID 3-17
changing the Loop ID 3-12
changing the LUN 3-12
changing the scan delay 3-21
changing the SCSI ID 3-17
changing the time 3-19
configurations restoring 4-2
configuring 3-1
configuring TCP/IP B-1
connecting to the Ethernet port 2-7
connecting to the FC port 2-5
connecting to the RS-232 port 2-6
connecting to the SCSI channels 2-4
default settings 2-10
disabling channels 3-12
disabling the alarm 3-21
displaying configuration information 3-32
displaying devices connected to 3-27, 3-28
displaying events 3-29
displaying hardware information 3-32
displaying its FC LUN 3-36
enabling channels 3-12
enabling the alarm 3-21
features 1-2
installing 2-1
installing in a rack 2-2
installing on a desktop or table 2-2
making the data connections 2-3
mapping of addresses A-1
rebooting 3-23
restoring default settings 3-23
selecting the topology 3-12
setting channel speed 3-13
specifications 1-5
unpacking 2-1
upgrading firmware 3-37
Router Administrator
accessing 3-1
Address Mapping screen 3-24
Alarm screen 3-22
Change Address Map screen 3-26
Channel Configuration screen 3-17
Channel screen 3-18
Configuration Menu 3-13
Display Address Map screen 3-26, 3-29
Display Devices screen 3-28
Enabled/Disabled screen 3-14
Even Log 3-30
Even Log Menu 3-30
Hardware Information screen 3-34, 4-6
Host Configuration 3-14
initial screen 3-2
Link Speed screen 3-15
Loop ID 3-15
Loop ID screen 3-16
Mapping Mode screen 3-25
navigating in 3-9
Restore Defaults screen 3-23
Scan Configuration screen 3-21
Set Date screen 3-19
Set Date/Time screen 3-19
Set Time screen 3-20
System Menu 3-2, 3-8
Utilities Menu 3-34, 4-6
router LUN 3-12
Router LUN screen 3-16
RS-232 port
connecting to 2-6
problems with 4-4
settings for 2-6
S
Scan Configuration screen 3-21
scan delay, changing for router 3-21
screens