Filter
Top Products
22
COMPUTER INPUT
Press MENU button and ON-SCREEN MENU will appear. Press
the POINT LEFT/RIGHT button to move the red frame pointer to
INPUT Menu icon.
Press the POINT DOWN button and a red-arrow icon will
appear. Move arrow to "RGB", and then press SELECT button.
1
3
When connecting a computer output [5 BNC Type (Green, Blue, Red,
Horiz. Sync and Vert. Sync.)] from a computer to G, B, R, H/HV and V
jacks.
WHEN SELECTING INPUT 2 (5 BNC INPUT JACKS )
SELECTING COMPUTER SYSTEM
WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS )
Press MENU button and ON-SCREEN MENU will appear. Press
the POINT LEFT/RIGHT button to move the red frame pointer to
INPUT Menu icon.
Press the POINT DOWN button to move the red arrow pointer to
Input 1 and then press SELECT button. Source Select Menu will
appear.
1
2
Input 1
INPUT MENU
Move the pointer to either Digital or Analog and then press
SELECT button.
3
When your computer is connected to COMPUTER
INPUT (DIGITAL) terminal, select RGB (Digital).
Digital
When your computer is connected to COMPUTER INPUT
(ANALOG) terminal, select RGB (Analog).
Analog
Move the pointer to Digital or
Analog and press SELECT
button.
Move the pointer (red arrow)
to Input 1 and press SELECT
button.
INPUT Menu icon
Source Select Menu
Input 2
INPUT MENU
Move the pointer to RGB
and press SELECT button.
INPUT Menu icon
Move the pointer (red arrow)
to Input 2 and press SELECT
button.
Source Select Menu
Press the POINT DOWN button to move the red arrow pointer to
Input 2 and then press SELECT button. Source Select Menu will
appear.
2
SELECTING INPUT SOURCE
DIRECT OPERATION
Select the appropriate input signal by pressing the INPUT button on
the Top control panel or on the Remote Control Unit.
If projector cannot reproduce proper image, select correct input source
through MENU OPERATION (see below).
INPUT button
Input 1
Input 2
Input 3
MENU OPERATION
Press MENU button and ON-SCREEN MENU will appear. Press
the POINT LEFT/RIGHT buttons to select Input and press
SELECT button.
Another dialog box INPUT SELECT
Menu will
appear.
Press the POINT DOWN button and a red-arrow icon will
appear. Move arrow to INPUT source that you want to select,
and then press SELECT button.
1
2
INPUT Menu icon