Filter
Top Products
23
DHD800 User Manual
020-000244-01 Rev.1 (08-2010)
Connecting the AC Power Cord
Installation
NOTE ON THE POWER CORD
AC power cord must meet the requirements of the country where you use the projector.
Confirm the AC plug type with the chart below and proper AC power cord must be used.
If the supplied AC power cord does not match your AC outlet, contact your sales dealer.
Projector side
AC Outlet side
Ground
To the AC Outlet.
(120 V AC)
For the U.S.A. and Canada
For Continental Europe
To the AC Outlet.
(200–240 V AC)
To POWER CORD
CONNECTOR on your
projector.
To POWER CORD
CONNECTOR on your
projector.
Fixing Bracket
Part No. 610 342 7744
(Narrow)
Part No. 610 342 7751
(Wide)
This projector uses nominal input voltages of 100-240 V AC.
It is designed to work with single-phase power systems
having a grounded neutral conductor. To reduce the risk of
electrical shock, do not plug into any other type of power
system.
If you are not sure of the type of power being supplied,
consult your authorized dealer or service station.
Connect the projector with all peripheral equipment before
turning on the projector.
CAUTION
The AC outlet must be near this equipment and
must be easily accessible.
Note:
• Unplug the AC power cord or turn off the MAIN ON/
OFF Switch when the projector is not in use. When the
projector is in stand-by mode, it consumes a little electric
power.
Connect the AC power cord to the projector.
1
3
Turn the fixing bracket to lock the AC power cord in place.
(See the right figure.)
Fit a fixing bracket in each hole.
2
2 types of fixing brackets are provided to prevent the AC power
cord from coming loose. Confirm your AC plug type with the
chart below and use the proper type of fixing bracket.
Follow these steps to attach the fixing bracket and connect the
AC power cord to the projector.
Fixing
bracket
Holes