Filter
Top Products
9
Cisco TelePresence PrecisionHD Camera PrecisionHD Camera User guide
D14640.09 PrecisionHD 1080p-720p Camera User Guide, June 2012.
© 2010-2012 Cisco Systems, Inc. All rights reserved.
www.cisco.com
The lens hood (not
mounted on the camera in
the picture) is detachable.
We recommend that you
mount it to prevent stray
light from disturbing your
video experience.
Snap it on gently.
The orange LED illuminates while in
a call and ickers when there is an
incoming call.
HDMI
• HDMI is the main video source. The maximum resolution
is 720p30.
Camera control
Camera control is used for controlling the pan, tilt and
zoom, and for powering up the camera.
Power
• When the camera is used with a Cisco Codec, power
will be supplied through Camera Control cable.
• When the camera is used with non-Cisco codecs, you
may have to connect power separately.
Extra camera
If you want to connect cameras in a daisy chain*:
• The rst camera in the chain is powered by the camera
control cable. The next must use the 12V DC Power in.
• Use an extra camera cable between the Extra Camera
sockets.
Kensington lock
The Kensington lock may be used to prevent the camera to
be moved from its place or to prevent theft.
The PrecisionHD Camera 720p
HDMI
video
out
Camera
control &
Power
Kensington
lock
VISCA
Daisy
chain
Power in
12 V DC
* Not supported with Codec C20
The green LED is continuously
illuminated when power is On,
but it ickers when receiving
signals from the remote control.
Contents
Appendices
Introduction
The physical interface
Connecting the camera
Video output formats
Daisy chaning
The physical interface