Cisco Systems 1700 Network Router User Manual


  Open as PDF
of 85
 
88
ASYNCHRONOUS SERIAL NETWORK MODULES
—
UP TO 128 KBPS
NM-4A/S
4-port asynchronous/
synchronous serial
network module
Provides four low-speed
serial connections via DB-
60 connectors that support
five interface types (RS-
232, RS-449, RS-530, V.35,
X.21) in either DTE or
DCE mode. The low-speed
serial connections can be
configured for up to either
115.2 kbps asynchronous
or 128 kbps synchronous
serial traffic.
Modular Router Solutions
Serial and Legacy
Concentration
3800 Series – 12.3(11)T
3700 Series – 12.2(8)T
3660 Series – 12.0(5)T
3640 – 11.1(7)AA
3620 – 11.1(7)AA
2811, 2821, and
2851 – 12.3(8)T4
2691 – 12.2(8)T
2600XM Series – 12.1(14)
Mainline, 12.2(12)
Mainline, 12.2(8)T1
2650 Series – 12.1(3)T
2620 Series – 11.3(2)XA
2610 Series – 11.3(2)XA
No reliance on other
network modules, WICs,
voice interface cards, or
advanced integration
modules.
NM-8A/S
8-port asynchronous/
synchronous serial
network module
Provides eight low-speed
serial connections via DB-
60 connectors that support
five interface types (RS-
232, RS-449, RS-530, V.35,
X.21) in either DTE or
DCE mode. The low-speed
serial connections can be
configured for up to either
115.2 kbps asynchronous
or 128 kbps synchronous
serial traffic.
Modular Router Solutions
Serial and Legacy
Concentration
3800 Series – 12.3(11)T
3700 Series – 12.2(8)T
3660 Series – 12.0(5)T
3640 – 11.1(7)AA
3620 – 11.1(7)AA
2811, 2821, and
2851 – 12.3(8)T4
2691 – 12.2(8)T
2600XM Series – 12.1(14)
Mainline, 12.2(12)
Mainline, 12.2(8)T1
2650 Series – 12.1(3)T
2620 Series – 11.3(2)XA
2610 Series – 11.3(2)XA
No reliance on other
network modules, WICs,
voice interface cards, or
advanced integration
modules.
NM-16A/S
16-port asynchronous/
synchronous serial
network module
The NM-16A/S combines
the rich multi-protocol
support of the NM-4A/S
and NM-8A/S with higher
densities to provide
compelling price-per-port
solutions for networking
applications. In addition to
the features of the
NM-4A/S and NM-8A/S,
the NM-16A/S adds
EIA-530A support, and
support for physical lead
manipulation in the IOS
configuration. Lead manip-
ulation allows the user
to configure the router
to ignore input signals,
view the state of input
signals, and to monitor
the transitions of input
signals.
Modular Router Solutions
Serial and Legacy
Concentration
3800 Series – 12.3(11)T
3700 Series – 12.3(2)T
2811, 2821, and
2851 – 12.3(8)T4
2691 – 12.3(2)T
2600XM Series – 12.3(2)T
In order to achieve higher
port density, the NM-
16A/S uses the Smart
Serial connector that is
also used on the WIC-2T
WAN Interface Card. Thus
customers must order
Smart Serial cables for use
with the NM-16A/S instead
of the “5-in-1” cables
used on the NM-4A/S and
NM-8A/S.
89
ASYNCHRONOUS SERIAL NETWORK MODULES
—
UP TO 128 KBPS
Product
Description
Supported Platforms
and Minimum Cisco
IOS Versions
Comments
Cisco Network Modules
Cisco Network Modules
SYNCHRONOUS SERIAL NETWORK MODULES
—
UP TO 8 MBPS
Product
Description
Supported Platforms
and Minimum Cisco
IOS Versions
Comments
NM-4T
4-port serial network
module
Provides four synchronous
serial interfaces, and supports
a total full-duplex throughput
of 8 Mbps, which can be
realized over one port (at 8 Mb/
s) or across all four ports (at 2
Mb/s on each port). Each port
supports full-duplex and half-
duplex operation at T1 and E1
speeds. All ports use identical
DB-60 connectors that support
five interface types (RS-232,
RS-449, RS-530, V.35, X.21) in
either DTE or DCE mode.
Modular Router Solutions
Serial and Legacy
Concentration
3800 Series – 12.3(11)T
3700 Series – 12.2(11)YT
3660 Series – 12.0(5)T
3640 – 11.2(4)XA
3620 – 11.2(4)XA
2811, 2821, and
2851 – 12.3(8)T4
2691 – 12.2(11)YT
No reliance on other
network modules, WICs,
voice interface cards, or
advanced integration
modules.
NM-32A
32-port asynchronous
network module
Provides 32 asynchronous
serial interfaces at speeds
up to 134 kbps. The 32
ports are cabled with four
custom “octopus” cables,
each terminating in eight
ports, each with an option
of physical endpoints,
including RJ-45 and DB-25
connectors.
Modular Router Solutions
Dial-up Remote Access
Serial and Legacy
Concentration
3800 Series – 12.3(11)T
3700 Series – Future
3660 Series – 12.0(5)T
3640 – 11.2(7a)P
3620 – 11.2(7a)P
2811, 2821, and
2851 – 12.3(8)T4
2691 – 12.2(8)T
2600XM Series – 12.1(14)
Mainline, 12.2(12)
Mainline, 12.2(8)T1
2650 Series – 12.1(3)T
2620 Series – 11.3(2)XA
2610 Series – 11.3(2)XA
No reliance on other
network modules, WICs,
voice interface cards, or
advanced integration
modules.
Product
Description
Supported Platforms
and Minimum Cisco
IOS Versions
Comments
NM-16A
16-port asynchronous
network module
Provides 16 asynchronous
serial interfaces at speeds
up to 134 kbps. The 16
ports are cabled with two
custom “octopus” cables,
each terminating in eight
ports, each with an option
of physical endpoints,
including RJ-45 and DB-25
connectors.
Modular Router Solutions
Dial-up Remote Access
Serial and Legacy
Concentration
3800 Series – 12.3(11)T
3700 Series – Future
3660 Series – 12.0(5)T
3640 – 11.2(7a)P
3620 – 11.2(7a)P
2811, 2821, and
2851 – 12.3(8)T4
2691 – 12.2(8)T
2600XM Series – 12.1(14)
Mainline, 12.2(12)
Mainline, 12.2(8)T1
2650 Series – 12.1(3)T
2620 Series – 11.3(2)XA
2610 Series – 11.3(2)XA
No reliance on other
network modules, WICs,
voice interface cards, or
advanced integration
modules.
 previous next