Filter
Top Products
139
VIC-2BRI-S/T-TE
2-port BRI ISDN voice
interface card
This two-port ISDN, S/T,
terminal side, basic rate
interface (BRI) voice
interface card (VIC)
connects directly to PSTNs
and supports both on-
premise and off-premise
connections. The VIC-2BRI-
S/T-TE supports a total of
four voice channels in a
single interface card via
two RJ-45 physical ports,
and enables toll-bypass
and voice-over-packet
features.
Modular Router Solutions
Voice and Fax Integration
3700 Series – 12.2(8)T
3660 Series – 12.0(7)XK
3640 – 12.0(3)T
3620 – 12.0(3)T
2691 – 12.2(8)T1
2600XM Series – 12.1(14)
Mainline, 12.2(12)
Mainline, 12.2(8)T1
2650 Series – 12.1(3)T
2620 Series – 12.0(3)T
2610 Series – 12.0(3)T
When used in a Cisco
2600, 3600 or 3700 Series
Router, requires a voice/
fax network module:
NM-1V or NM-2V.
Prior to Cisco IOS 12.3
Mainline, requires a Cisco
IOS “Plus” feature set.
12.3 Mainline and forward
supported in “IP Voice”
feature set.
J1 VOICE INTERFACE CARDS
Product
Description
Supported Platforms
and Minimum Cisco
IOS Versions
Comments
VIC-1J1
1-port J1 voice
interface card
Provides a one-port J1
line interface to Japanese
private branch exchanges
(PBXs). It is specifically
designed to conform
with the TTC JJ-20.10-12
standards which define
the interface between a
PBX and a TDM switch.
This network module is
currently designed only for
voice and fax applications.
Modular Router Solutions
Voice and Fax Integration
3800 Series – Not
Supported except in
NM-HDV and NM-HDV2
3700 Series – Future
3660 Series – 12.1(3)XI
3640 – 12.1(3)XI
3620 – 12.1(3)XI
2811, 2821, and 2851 – Not
Supported except in
NM-HDV and NM-HDV2
2691 – Future
2600XM Series – 12.2(8)T1
2650 Series – 12.1(3)XI
2620 Series – 12.1(3)XI
2610 Series – 12.1(3)XI
Requires a high-density
digital voice/fax network
module NM-HDV.
Prior to Cisco IOS 12.3
Mainline, requires a Cisco
IOS “Plus” feature set.
12.3 Mainline and forward
supported in “IP Voice”
feature set.
ISDN BRI VOICE INTERFACE CARDS
Product
Description
Supported Platforms
and Minimum Cisco
IOS Versions
Comments
Cisco Interface Cards
Product
Description
Supported Platforms
and Minimum Cisco
IOS Versions
Comments
AIM-COMPR4
Cisco data compression
advanced interface
module
The data compression
AIM plugs directly into
one or both of the
two internal advanced
integration module slots
for supported Cisco
routers.
Modular Router Solutions
Bandwidth Management
3800 Series – 12.3(11)T
3700 Series – 12.2(11)YT
3745 – 12.2(13)T
3725 – 12.2(13)T
3660 Series – 12.0(5)T
2691 – 12.2(13)T
No reliance on other
network modules, WICs,
voice interface cards, or
advanced integration
modules.
Advanced Integration Modules
and Security Modules
COMPRESSION ADVANCED INTEGRATION MODULES
AIM-COMPR2
Cisco data compression
advanced interface
module
The data compression
AIM plugs directly into
the Cisco 2600’s internal
advanced integration
module slot. This AIM
provides 2E1 full duplex
(2 x 2.048 Mbps full
duplex) of compressed
input/output.
Modular Router Solutions
Bandwidth Management
2600XM Series – 12.1(14)
Mainline, 12.2(12)
Mainline, 12.2(8)T1
2650 Series – 12.1(3)T
2600 Series – 12.0(1)T
No reliance on other
network modules, WICs,
voice interface cards, or
advanced integration
modules.
138