Filter
Top Products
127
Cisco Interface Cards
Cisco Interface Cards
ETHERNET AND HIGH-SPEED SWITCHING WICS
Product
Description
Supported Platforms
and Minimum Cisco
IOS Versions
Comments
ETHERNET AND HIGH-SPEED SWITCHING WICS
Product
Description
Supported Platforms
and Minimum Cisco
IOS Versions
Comments
HWIC-D-9ESW
9-port 10/100 switch
double-wide HWIC
Provides nine autosensing
10/100BASE-T Fast
Ethernet switched ports
with speeds up to 200
Mbps (full-duplex)
between switch ports.
Provides support for
802.1Q, 802.1p, 802.1D,
and more. This interface
card inserts into a
Cisco double-wide WIC
expansion slot.
Modular Router Solutions
Integrated Switching
3800 Series – 12.3(11)T
2800 Series – 12.3(8)T4
Double-wide form factor
(requires two interface
card slots). A maximum of
two ESW modules (NM or
HWIC) are supported per
router. Not supported on
Cisco 1841.
HWIC-D-9ESW-POE
9-port 10/100 switch
double-wide HWIC with
8 ports of Power over
Ethernet support
Provides nine autosensing
10/100BASE-T Fast
Ethernet switched ports
with support for Power
over Ethernet and speeds
up to 200 Mbps (full-
duplex) between switch
ports. Provides support for
802.1Q, 802.1p, 802.1D,
and more. This interface
card inserts into a Cisco
mixed-media network
module or directly into a
Cisco double-wide WIC
expansion slot.
Modular Router Solutions
Integrated Switching
3800 Series – 12.3(11)T
2800 Series – 12.3(8)T4
Double-wide form factor
(requires two interface
card slots). A maximum of
two ESW modules (NM or
HWIC) are supported per
router. Not supported on
Cisco 1841. Requires the
router to have an AC-IP
power supply to deliver
inline power / PoE.
ILPM-8=
Inline power module for
HWIC-D-9ESW
8-port daughter card for
upgrading existing HWIC-
D-9ESW to be capable of
supporting inline power.
Modular Router Solutions
Integrated Switching
3800 Series – 12.3(11)T
2800 Series – 12.3(8)T4
Requires a HWIC-D-9ESW
module. Router power
supply upgrade (AC-IP)
needed to provide inline
power to switch.
WIC-1ENET
1-port Ethernet WIC
Provides one standards-
based 10BASE-T Ethernet
network Interface.
Operates in half- and full-
duplex modes. Supports
PPP over Ethernet (PPPoE)
to authenticate the router
on a service provider’s
network using PPP.
Modular Router Solutions
DSL Access
VPN and Firewall
1760 – 12.2(11)T
1751 – 12.2(4)T
1721 – 12.2(8)T
No reliance on other
network modules, WICs,
voice interface cards, or
advanced integration
modules.
WIC-4ESW
4-port 10/100 switch WIC
Provides four 10/100BASE-
T Fast Ethernet switched
ports with speeds up to
200 Mbps (full-duplex)
between switch ports.
Provides support for
802.1Q, 802.1p, and
802.1D. This interface card
inserts into a Cisco mixed-
media network module or
directly into a Cisco WIC
expansion slot.
Modular Router Solutions
Integrated Switching
1760 – 12.3(4)YB
1751 – 12.3(4)YB
1721 – 12.3(4)YB
No reliance on other
network modules, WICs,
voice interface cards, or
advanced integration
modules.
HWIC-4ESW
4-port 10/100 switch HWIC
Provides four autosensing
10/100BASE-T Fast
Ethernet switched ports
with speeds up to 200
Mbps (full-duplex)
between switch ports.
Provides support for
802.1Q, 802.1p, 802.1D,
and more. This interface
card inserts into a Cisco
mixed-media network
module or directly into a
Cisco WIC expansion slot.
Modular Router Solutions
Integrated Switching
3800 Series – 12.3(11)T
2800 Series – 12.3(8)T4
1841 – 12.3(8)T4
Single-wide form factor
(requires one HWIC slot).
A maximum of two ESW
modules (NM or HWIC) are
supported per router.
HWIC-4ESW-POE
4-port 10/100 switch HWIC
with Power over Ethernet
support
Provides four autosensing
10/100BASE-T Fast
Ethernet switched ports
with support for Power
over Ethernet and speeds
up to 200 Mbps (full-
duplex) between switch
ports. Provides support for
802.1Q, 802.1p, 802.1D,
and more. This interface
card inserts into a Cisco
mixed-media network
module or directly into a
Cisco WIC expansion slot.
Modular Router Solutions
Integrated Switching
3800 Series – 12.3(11)T
2800 Series – 12.3(8)T4
Single-wide form factor
(requires one HWIC slot).
A maximum of two ESW
modules (NM or HWIC)
are supported per router.
Requires the router to
have an AC-IP power
supply to deliver inline
power / PoE.
ILPM-4=
Inline power module for
HWIC-4-ESW
4-port daughter card for
upgrading existing
HWIC-4-ESW to be
capable of supporting
inline power .
Modular Router Solutions
Integrated Switching
3800 Series – 12.3(11)T
2800 Series – 12.3(8)T4
Requires a HWIC-4ESW
module. Router power
supply upgrade (AC-IP)
needed to provide power
to switch.
126