Filter
Top Products
Installing a Mini-Flash Module
viii
Cisco 1750 Router Hardware Installation Guide
78-6169-02
Figure 5 Installing a Mini-Flash Module
Follow these steps to install a mini-Flash memory module on the motherboard:
Note You need to remove the motherboard from the chassis to remove the
mini-Flash memory module.
Step 1 Locate the module slot on the motherboard, shown in Figure 2.
Step 2 Hold the module with the notched edge away from you.
Step 3 Insert the module into the module slot at a 45-degree angle, as shown in Figure 5.
Step 4 Press down firmly on the module until you hear a clicking sound and the module
is firmly seated in the slot.
Step 5 Turn the motherboard back to its original position (right-side up) and place it in
the chassis as before.
Mini-Flash module slot
45 degrees
Notched edge
22309