Cisco Systems 1805 Network Router User Manual


  Open as PDF
of 6
 
3-3
Cisco 1805 DOCSIS Cable Router Hardware Installation Guide
OL-14661-01
Chapter 3 Chassis Installation Procedures for the Cisco 1805 DOCSIS Cable Router
Setting Up the Chassis
Figure 3-1 Wall-Mounting Features on the Cisco 1805 Cable Router
To mount the router on a wall or other surface, follow these steps:
Step 1 Install the two screws 6 inches (15.2 centimeters) horizontally apart on a wall or other vertical surface.
The screws should protrude 1/4 inch (0.6 centimeter) from the surface of the wall.
Step 2 Remove the rubber feet from the router.
Step 3 Hang the router on the screws, front panel down. This is the appropriate orientation for safe use. (See
Figure 3-2.)
1 Wall-mounting features
103162
11
6.00 inches6.00 inches
 previous next