2-17
Catalyst 2900 Series XL Hardware Installation Guide
78-6461-03
Chapter 2 Installation
Installing the Switch in a Rack
Attaching the Brackets to a Catalyst 2912 LRE XL or 2924 LRE XL
Switch
Follow these steps to attach the brackets to a Catalyst 2912 LRE XL or
2924 LRE XL switch:
The bracket orientation and screws that you use depend on whether you are
attaching the brackets for a 19-, 23-, or 24-inch rack. Use two of the supplied
screws to attach each bracket, according to rack size:
• For a 19-inch rack, use the supplied Phillips flat-head screws to attach the
long side of the bracket to the switch.
• For a23- or 24-inch rack, use the supplied Phillips truss-head screws to attach
the short side of the bracket to the switch.
Figure 2-3, Figure 2-5, Figure 2-6, Figure 2-7,andFigure 2-8 show how to attach
a bracket to one side of the switch. Follow the same steps to attach the second
bracket to the opposite side of the switch.
