Filter
Top Products
24 Part Number 4021203 Rev A
How Do I Connect the Cable Modem for Internet and Telephone Service?
Connecting the Cable Modem for High-Speed Data and Telephone
Service
The following installation procedure ensures proper setup and configuration for the
cable modem.
1 Choose an appropriate and safe location to install the cable modem (close to a
power source, an active cable connection, your PC—if using high-speed Internet,
and your telephone lines—if using VoIP).
WARNING:
To avoid personal injury, follow the installation instructions in the exact
order shown.
To prevent possible damage to equipment, disconnect any other telephone
service before connecting your cable modem to the same wires.
Hazardous electrical voltages can exist on the telephone ports on the cable
modem and can be present on any connected wiring including Ethernet
wiring, telephone wiring and coax cable.
Telephone wiring and connections must be properly insulated to prevent
electrical shock.
ork Telephone connections to an installed home telephone wiring netw
must be done by a qualified installer. The cable telephone service
provider may offer professional installation and connection to the home
telephone wiring network. A fee may be charged for this service.
and connections must be properly insulated to prevent electrical Wiring
shock.
ower from the cable modem before attempting to connect to Disconnect p
any device.
Power off your2 PC and other networking device; then, unplug them from the
3 der to the coax
your service provider before using a splitter as a splitter may degrade the signal.
power source.
Connect the active RF coaxial cable from your service provi
connector labeled
on the back of the cable modem. CABLE
Note: To connect a TV, DHCT, set-top, or VCR from the same cable connection,
you will need to install a cable signal splitter (not included). Always check with