Filter
Top Products
104 OL-30824-01
Front Panel LED Status Indicator Functions
Normal Operations (AC Power applied)
The following chart illustrates the appearance of the residential gateway front panel
LED status indicators during normal operations when AC power is applied to the
gateway.
Front Panel LED Status Indicators During Normal Conditions
Front Panel
Indicator
Normal Operations
1 POWER On
2 DS On
3 US On
4 ONLINE On
5 ETHERNET
1 - 4
On - When a single device is connected to the Ethernet port and no data
is being sent to or from the modem
Blinks - When only one Ethernet device is connected and data is being
transferred between the consumer premise equipment (CPE) and the
wireless home gateway
Off - When no devices are connected to the Ethernet ports
6 USB
On - When a single device is connected to the USB port and no data is
being sent to or from the modem
Blinks - When only one USB device is connected and data is being
transferred between the consumer premise equipment (CPE) and the
wireless home gateway
Off - When no devices are connected to the USB ports
7 WIRELESS
LINK
On - When the wireless access point is enabled and operational
Blinks - When data is being transferred between the CPE and the
wireless home gateway
Off - When the wireless access point is disabled by the user
8 WIRELESS
SETUP
Off - When wireless setup is not active
Blinks -
When wireless setup is active to add new wireless clients on the
wireless network
9 TEL 1
On - When telephony service is enabled
Blinks - When line 1 is in use
10 TEL 2
On - When telephony service is enabled
Blinks - When line 2 is in use