Filter
Top Products
Contents
li
Cisco ASA 5500 Series Configuration Guide using the CLI
Specifying the Access Control Server Group 70-8
Setting the Query-for-Posture-Changes Timer 70-9
Setting the Revalidation Timer 70-10
Configuring the Default ACL for NAC 70-10
Configuring Exemptions from NAC 70-11
Assigning a NAC Policy to a Group Policy 70-13
Changing Global NAC Framework Settings 70-13
Changing Clientless Authentication Settings 70-13
Enabling and Disabling Clientless Authentication 70-14
Changing the Login Credentials Used for Clientless Authentication 70-14
Changing NAC Framework Session Attributes 70-15
CHAPTER
71 Configuring Easy VPN Services on the ASA 5505 71-1
Specifying the Client/Server Role of the Cisco ASA 5505 71-1
Specifying the Primary and Secondary Servers 71-2
Specifying the Mode 71-3
NEM with Multiple Interfaces 71-3
Configuring Automatic Xauth Authentication 71-4
Configuring IPsec Over TCP 71-4
Comparing Tunneling Options 71-5
Specifying the Tunnel Group or Trustpoint 71-6
Specifying the Tunnel Group 71-7
Specifying the Trustpoint 71-7
Configuring Split Tunneling 71-8
Configuring Device Pass-Through 71-8
Configuring Remote Management 71-9
Guidelines for Configuring the Easy VPN Server 71-10
Group Policy and User Attributes Pushed to the Client 71-10
Authentication Options 71-12
CHAPTER
72 Configuring the PPPoE Client 72-1
PPPoE Client Overview 72-1
Configuring the PPPoE Client Username and Password 72-2
Enabling PPPoE 72-3
Using PPPoE with a Fixed IP Address 72-3
Monitoring and Debugging the PPPoE Client 72-4
Clearing the Configuration 72-5