![](http://pdfasset.owneriq.net/7/02/70242a1d-7de2-47db-bb39-a0524b4b647c/70242a1d-7de2-47db-bb39-a0524b4b647c-bg36a.png)
42-10
Cisco ASA 5500 Series Configuration Guide using the CLI
Chapter 42 Getting Started with Application Layer Protocol Inspection
Configuring Application Layer Protocol Inspection
icmp error —
ils —
im [map_name] If you added an Instant Messaging inspection policy map
according to “Configuring an Instant Messaging Inspection
Policy Map for Additional Inspection Control” section on
page 43-21, identify the map name in this command.
ip-options [map_name] If you added an IP Options inspection policy map according
to “Configuring an IP Options Inspection Policy Map for
Additional Inspection Control” section on page 43-25,
identify the map name in this command.
mgcp [map_name] If you added an MGCP inspection policy map according to
“Configuring an MGCP Inspection Policy Map for
Additional Inspection Control” section on page 44-13,
identify the map name in this command.
netbios [map_name] If you added a NetBIOS inspection policy map according to
“Configuring a NetBIOS Inspection Policy Map for
Additional Inspection Control” section on page 43-29,
identify the map name in this command.
pptp —
radius-accounting [map_name]The radius-accounting keyword is only available for a
management class map. See the “Creating a Layer 3/4 Class
Map for Management Traffic” section on page 32-14 for
more information about creating a management class map.
If you added a RADIUS accounting inspection policy map
according to “Configuring a RADIUS Inspection Policy
Map for Additional Inspection Control” section on
page 46-10, identify the map name in this command.
rsh —
rtsp [map_name] If you added a RTSP inspection policy map according to
“Configuring an RTSP Inspection Policy Map for Additional
Inspection Control” section on page 44-16, identify the map
name in this command.
sip [map_name] If you added a SIP inspection policy map according to
“Configuring a SIP Inspection Policy Map for Additional
Inspection Control” section on page 44-20, identify the map
name in this command.
skinny [map_name] If you added a Skinny inspection policy map according to
“Configuring a Skinny (SCCP) Inspection Policy Map for
Additional Inspection Control” section on page 44-26,
identify the map name in this command.
snmp [map_name] If you added an SNMP inspection policy map according to
“Configuring an SNMP Inspection Policy Map for
Additional Inspection Control” section on page 46-11,
identify the map name in this command.
Table 42-2 Protocol Keywords
Keywords Notes