Filter
Top Products
3
For multiple context mode, if you place the MSFC or router behind the ASASM, you should only
connect it to a single context. If you connect it to multiple contexts, the MSFC/router will route
between the contexts, which might not be your intention. The typical scenario for multiple contexts is
to use a router in front of all the contexts to route between the Internet and the switched networks.
Context A Context B Context C
VLAN 203VLAN 202VLAN 201
VLAN 100
Admin
Context
VLAN 200
VLAN 300 VLAN 303
VLAN 302VLAN 301
MSFC/Router
Internet
Inside
Customer A
Inside
Customer B
Inside
Customer C
Admin
Network