Filter
Top Products
6
5 Logging Into the ASA Services Module
From the switch CLI, you can connect to a virtual console session on the ASASM:
Command Purpose
Step 1
service-module session [switch {1 |2}]
slot number
Example:
Router# service-module session slot 4
hostname>
Connects to the ASASM. For a switch in a
VSS, enter the switch argument.
You access user EXEC mode.
Step 2
enable
Example:
hostname> enable
Password:
hostname#
Accesses privileged EXEC mode, which is the
highest privilege level.
Enter the enable password at the prompt. By
default, the password is blank.
Step 3
configure terminal
Example:
hostname# configure terminal
hostname(config)#
Accesses global configuration mode.