Filter
Top Products
3-10
Cisco 860 Series and Cisco 880 Series Integrated Services Routers Hardware Installation Guide
OL-16193-01
Chapter 3 Connecting the Router
Connecting a G.SHDSL Line—G.SHDSL Port
Note Follow the instructions from your Internet service provider to determine which modem port to
use.
Connecting a G.SHDSL Line—G.SHDSL Port
To connect the router to a (global industry standard) symmetrical high-speed DSL (G.SHDSL) line,
follow these steps:
Step 1 Connect one end of the lavender DSL cable to the G.SHDSL port on the router. See Figure 3-7.
Figure 3-7 Connecting the G.SHDSL Line
Step 2 Connect the other end of the cable to the DSL wall jack.
Note The DSL line must have been provisioned by your service provider and correctly configured so that the
LED shows the carrier detect (CD) status. If the G.SHDSL CD LED is not on, check with your DSL
service provider.
1 G.SHDSL port on the router 2 DSL wall jack
232175
2
1