Filter
Top Products
5-18
Cisco Aironet 340, 350, and CB20A Wireless LAN Client Adapters Installation and Configuration Guide for Windows
OL-1394-08
Chapter 5 Configuring the Client Adapter
Setting Advanced Ad Hoc Parameters
Setting Advanced Ad Hoc Parameters
Note You can set advanced ad hoc parameters only if your client adapter has been set to operate in an ad hoc
network. See the Network Type parameter in Table 5-2.
The Advanced (Ad Hoc) screen (see Figure 5-4) enables you to set parameters that control how the client
adapter operates within an ad hoc network. To access this screen, choose the Advanced (Ad Hoc) tab
from the Properties screens.
Figure 5-4 Advanced (Ad Hoc) Screen