Filter
Top Products
16-7
Cisco ONS 15310-CL Ethernet Card Software Feature and Configuration Guide, R5.0
June 2005
Chapter 16 CE-100T-8 Ethernet Operation
CE-100T-8 SONET Circuits and Features
The CE-100T-8 supports up to eight low order VCAT circuits. The available circuit sizes are VT1.5-nv,
where n ranges from 1 to 64. The total number of VT members cannot exceed 168 VT1.5s with each of
the two pools on the card supporting 84 VT1.5s. The user can create a maximum of two circuits at the
largest low order VCAT circuit size, VT1.5-64v.
A user can combine CCAT high order, VCAT high order, and VCAT low order circuits in any way as
long as there is a maximum of eight circuits and the mapper chip bandwidth restrictions are observed.
The following table details the maximum density service combinations.
* This LO-VCAT Circuit combination is achievable if the first circuit created on the card is an LO VCAT circuit. If the first circuit
created on the card is HO-VCAT or CCAT STS circuits, then a maximum of six LO-VCAT circuits can be added on the card.
Table 16-5 CCAT High Order Circuit Size Combinations
Number of STS-3c Circuits Maximum Number of STS-1 Circuits
None 6
13
2None
Table 16-6 VCAT High Order Circuit Size Combinations
Number of STS-1-3v Circuits Maximum Number of STS-1-2v Circuits
None 2
11
2None
Table 16-7 CE-100T-8 Maximum Service Densities
Service
Combination
STS-3c or
STS-1-3v STS-1-2v STS-1 VT1.5-xV (x=1-7)
Number of Active
Service
12000 2
21110 3
31030 4
4 1 0 0 7(x=1-12)* 8*
50220 4
6 0 1 1 6(x=1-14) 8
7 0 1 0 7(x=1-12)* 8*
80060 6
9 0 0 3 5(x=1-16) 8
100008 (x=1-21)8