Filter
Top Products
Chapter 3 Configuring the DOCSIS Residential Gateway
82 4021194 Rev A
Configuring Your Wireless Network Security and Encryption Parameters
Use the Setup Wireless - Security page to configure your WAP wireless equivalent
privacy (WEP) encryption keys and authentication.
Note: If you are not familiar with the advanced settings detailed in this section,
contact your service provider before you attempt to change any of the residential
gateway default wireless security settings.
Click Security in the Wireless section of the Setup page to access the Setup Wireless -
Security page.
Important: Your residential gateway ships from the factory with WPA security
enabled to provide you with a basic level of wireless network security. To gain initial
access to your wireless network, select WPA security on your computer's wireless
adapter and enter the WPA key to match the key setup in your gateway. The factory
default WPA key in the gateway is the serial number of the device. You can continue
to use this factory default key. However, to maximize your wireless security, it is
highly recommended that you use something other than the factory default key.
Using Wi-Fi Protected Setup (WPS)
Wi-Fi Protected Setup (WPS) allows you to easily attach wireless devices that also
support WPS. When WPS is enabled and activated, you can attach other wireless
clients with the press of a button or by entering the station PIN.
After enabling WPS, you can activate the automatic registration by clicking the Start
WPS button in the WPS section of the Setup Wireless - Security page.