Filter
Top Products
Command Reference
46
Release 12.0(1)T
show ip dhcp database
To display Cisco IOS Dynamic Host Configuration Protocol (DHCP) Server database agent
information, use the show ip dhcp database Privileged EXEC command.
show ip dhcp database [url]
Syntax Description
Defaults
If a URL is not specified, all database agent records are shown. Otherwise, only information about
the specified agent is displayed.
Command Modes
Privileged EXEC
Usage Guidelines
This command first appeared in Cisco IOS Release 12.0(1)T.
Examples
The following example shows all DHCP server database agent information. Table 4 lists descriptions
for each field in the example.
Router# show ip dhcp database
URL : ftp://user:password@172.16.4.253/router-dhcp
Read : Dec 01 1997 12:01 AM
Written : Never
Status : Last read succeeded. Bindings have been loaded in RAM.
Delay : 300 seconds
Timeout : 300 seconds
Failures : 0
Successes : 1
url (Optional) Specifies the remote file used to store automatic DHCP
bindings. Following are the acceptable URL file formats:
• tftp://host/filename
• ftp://user:password@host/filename
• rcp://user@host/filename
Table 4 show ip dhcp database Field Descriptions
Field Description
URL Specifies the remote file used to store automatic DHCP
bindings. Following are the acceptable URL file formats:
• tftp://host/filename
• ftp://user:password@host/filename
• rcp://user@host/filename