Filter
Top Products
The Processor Switching Module
Cisco MGX 8850 Installation and Configuration, Release 1.1.00, Part Number 78-6186-02
6-10
Step 3 As needed, specify usage parameter control according to the connection type. Use either
cnfupccbr, cnfupcvbr, cnfupcabr, or cnfupcubr. The following text lists the parameters
for each. Note that the parameters for cnfupcvbr and cnfupcabr are the same. Also, the
polType (policing type) parameter has numerous variations in accordance with ATM
Forum v4.0. For a list of the policing variations, see Table 6-1 after the syntax
descriptions.
cnfupccbr <conn_ID> <polType> <pcr[0+1]> <cdvt[0+1]> <IngPcUtil>
<EgSrvRate> <EgPcUtil>
• conn_ID identifies the connection. The format is port.vpi.vci.
• polType is the policing type. The choices are 4 or 5. See Table 6-1 for a description of
these types.
• pcr is the peak call rate in the range 50–1412832 cps.
• cdvt is the cell delay variation tolerance in the range 1–5000000 microseconds.
• IngPcUtil is the percentage of utilization on the ingress. The range is 1–100.
• EgSrvRate is the egress service rate. The range is 50–1412832 cps.
• EgPcUtil is the percentage of utilization on the egress. The range is 1–100.
cnfupcvbr or cnfupcabr <conn_ID> <polType> <pcr[0+1] < cdvt[0+1]> <scr> <mbs>
<IngPcUtil> <EgSrvRate> <EgPcUtil>
• conn_ID identifies the connection. The format is port.vpi.vci.
• polType is the policing type in the range 1– 5. See Table 6-1 for a list of these types.
• pcr is the peak call rate in the range 50–1412832 cps.
• cdvt is the cell delay variation tolerance in the range 1–5000000 microseconds.
• scr is the sustained cell rate. The range is 50–1412832 cps.
• mbs is the maximum burst size. The range is 1–5000000 cells.
• IngPcUtil is the percentage of utilization on the ingress. The range is 1–100.
• EgSrvRate is the egress service rate. The range is 50–1412832 cps.
• EgPcUtil is the percentage of utilization on the egress. The range is 1–100.
cnfupcubr <conn_ID> <polType> <pcr[0+1] < cdvt[0+1]> <IngPcUtil>
• conn_ID identifies the connection. The format is port.vpi.vci.
• polType is the policing type. The range is 3– 5. See Table 6-1 for a list of these types.
• pcr is the peak call rate in the range 50–1412832 cps.
• cdvt is the cell delay variation tolerance in the range 1–5000000 microseconds.
• IngPcUtil is the percentage of utilization on the ingress. The range is 1–100.