Filter
Top Products
Card and Service Configuration 6-17
Adding and Configuring Connections on the AUSM/B
cnfupcubr <port.vpi.vci> <enable> <pcr[0+1]> <cdvt[0+1]> <IngPc> <util> <clp_tag>
Step 3 If the system has the ForeSight feature, use cnfchanfst to configure it.
cnfchanfst <port.vpi.vci> <enable> <fgcra_enable> <ibs> <pcr> <mcr> <icr>
port.vpi.vci identifies the connection.
enable is the enabled/disable for UPC: 1=Disable, 2=Enable.
pcr is the peak cell rate. Without IMA, the range is:
T1, 10–3622
E1, 10–4528
clear E1, 10–4830
For IMA, multiply the line rate by the number of links.
cdvt cdvt[0+1] is the cell delay variation tolerance for cells with
CLP=[0+1]. The range is 1–250000 micro seconds.
scr is the peak cell rate. Without IMA, the range is:
T1, 10–3622
E1, 10–4528
clear E1, 10–4830
For IMA, multiply the line rate by the number of links.
scr_police specifies the type of scr policing: 1= CLP[0] Cells,
2=CLP[0+1] cells, and 3=no SCR policing.
mbs is the maximum burst size: the range is 1–5000 cells.
IngPc is the percent utilization on the ingress. The range is 1–127. The
default is 0.
hclp_tag is the enable for CLP tagging: 1=disable, 2=enable.
port.vpi.vci identifies the connection.
enable is the enabled/disable for the ForeSight feature:
1=disable, 2=enable.
fgcra_enable is the enabled/disable for the frame-based generic cell rate
algorithm: 1=disable, 2=enable.
ibs is the initial burst size in the range 0–5000 cells.
pcr is the peak cell rate. Without IMA, the range is:
T1, 10–3622
E1, 10–4528
clear E1, 10–4830
For IMA, multiply the line rate by the number of links.