Filter
Top Products
Cisco NM-8AM-V2 and NM-16AM-V2 Analog Modem Network Modules with V.92
modem country smart_acf
10
Cisco IOS Release 12.3(7)T
modem country smart_acf
To customize the modem firmware behavior according to the country of deployment, use the modem
country smart_acf command in global configuration mode. To set the default value, use the no form of
this command.
modem country smart_acf country-name
no modem country smart_acf country-name
Syntax Description
Defaults United States and Canada
Command Modes Global configuration
Command History
Usage Guidelines Use this command to set the modem for use in a specific country. When a country name is specified, the
firmware customizes the modem for use in the country where it is deployed. The following table includes
valid values for the country-name argument and the country or countries associated with each argument
value.
country-name Name of the country. For valid argument values, see the table in the “Usage
Guidelines” section.
Release Modification
12.3(4)XD This command was introduced.
12.3(7)T This command was integrated in Cisco IOS Release 12.3(7)T on Cisco 2600
series and Cisco 3700 series routers.
Valid Values for the country-name Argument Country or Countries Where Located
argentina Argentina
australia Australia
austria Austria
belgium Belgium and Luxemburg
brazil Brazil
bulgaria Bulgaria
china China
croatia Croatia
czech Czechoslovakia
denmark Denmark and Iceland
finland Finland
france France