Filter
Top Products
Cisco NM-8AM-V2 and NM-16AM-V2 Analog Modem Network Modules with V.92
How to Configure the Cisco NM-8AM-V2 and NM-16AM-V2 Network Modules
6
Cisco IOS Release 12.3(7)T
Verifying the Modem Configuration
Perform the following tasks to verify the modem configuration.
SUMMARY STEPS
1. enable
2. show modem version
3. debug modem
4. show modem version
5. exit
DETAILED STEPS
Troubleshooting Tips
Use the following debug commands to troubleshoot the modem:
• debug async state
• debug dialer
• debug dialer forwarding
• debug dialer map
• debug dialer packets
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
show modem version
Example:
Router# show modem version
Displays the modem firmware version and datapump
version.
Step 3
debug modem
Example:
Router# debug modem
Displays the modem events and state transitions.
Step 4
show modem version
Example:
Router# show modem version
Displays the modem firmware version, the datapump
version, and the firmware log.
Step 5
exit
Router# exit
Exits privileged EXEC mode.