Filter
Top Products
Cisco NM-8AM-V2 and NM-16AM-V2 Analog Modem Network Modules with V.92
Configuration Examples for Cisco NM-8AM-V2 and NM-16AM-V2 Network Modules
8
Cisco IOS Release 12.3(7)T
Configuration Examples for Cisco NM-8AM-V2 and
NM-16AM-V2 Network Modules
Example of the modem country smart_acf Command
The following example shows the usage of the modem country smart_acf command:
Router# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)# modem country smart_acf usa
Router(config)# end
Additional References
The following sections provide references related to Cisco NM-8AM-V2 and NM-16AM-V2 network
modules.
Related Documents
Standards
Related Topic Document Title
AT Commands AT Command Set and Register Summary for V.90 WIC-1AM and
WIC-2AM Analog Modem WAN Interface Cards
NM-8AM or NM-16AM Analog Modem Module
Configuration
Configuring Dialin with the NM-8AM or NM-16AM Analog Modem
Module
Data Sheet on Network Modules Integrated V.92 Analog Modem Network Modules for Cisco 2600
Series, 3660, and 3700 Series Routers
Standards Title
No new or modified standards are supported by this
feature, and support for existing standards has not been
modified by this feature.