Filter
Top Products
The router does not receive its prefix and hence no address−registration can occur.
When enabling debug atm ilmi atm 0/0/0 on the LightStream 1010, this can be seen when the atm 0/0/0
interface is brought up:
!−−− Output suppressed.
Apr 2 12:42:11.792: ILMI: My Device type is set to Node (ATM0/0/0)
Apr 2 12:42:11.792: ILMI(ATM0/0/0): From NodeConfigComplete To UpAndNormal <ilmi_process_intfRestart>
Apr 2 12:42:11.792: ILMI(ATM0/0/0): Keep Alive enabled
Apr 2 12:42:11.792: ILMI(ATM0/0/0) Address Registration disabled. Prefix not sent
!−−− Output suppressed.
The solution is to re−enable atm address−registration and do a shut/no shut on the atm interface to restart
ILMI.
Related Information
LANE Design Recommendations•
SSRP Sample Configuration•
FSSRP Sample Configuration•
Configuring LANE•
Troubleshooting ATM LAN Emulation Networks•
LANE Technology Support•
Technical Support − Cisco Systems•
All contents are Copyright © 1992−2005 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Updated: May 11, 2005 Document ID: 10450
Cisco − ILMI Address Registration Problems: %LANE−3−NOREGILMI