Filter
Top Products
Conventions
For more information on document conventions, refer to the Cisco Technical Tips Conventions.
Associated Error Message
Address resolution problems are usually associated with the following error message:
%LANE−3−NOREGILMI: [chars] [chars] cannot register [ATM address] with ILMI
For example:
%LANE−3−NOREGILMI: ATM2/0/0.1 LEC cannot register
47.00918100000000603E5A4501.00D0069A7C40.01 with ILMI
This error message can be reported by one of the following:
LAN Emulation Configuration Server (LECS)•
LAN Emulation Server (LES) or broadcast and unknown server (BUS)•
LAN Emulation Client (LEC)•
Although this document looks at the address registration problems encountered by a LEC, the explanations are
also valid for registration problems with the LECS and LES/BUS.
Configure
Network Diagram
This setup illustrates the problem:
This setup uses:
Bernard is a Cisco 7500 router running Cisco IOS® software release 12.1(4).•
Casimir is a LightStream 1010 running Cisco IOS software release 12.0(13)W5(19b)•
Tintin is a Cisco 7000 router running Cisco IOS software release 11.2(22)P.•
This setup uses LANE, and the LECS and LES/BUS are located on the LightStream 1010.
Note: The configuration used here does not give the best LANE performances; it is simply being used for
illustration. For design recommendations regarding LANE services, refer to the LANE Design
Recommendations.
Cisco − ILMI Address Registration Problems: %LANE−3−NOREGILMI