Filter
Top Products
6-5
Cisco Info Center Installation and Configuration Guide, 3.6.1
OL-6349-01
Chapter 6 Desktop Info Servers
Installing a Dual Server Desktop Architecture
Prompts for Setting Up a DSD Configuration
Table 6-1 summarizes the OINSTALL installation prompts for DSD configuration and the required
responses to the prompts.
Table 6-1 DSD Configuration Prompts
Prompt Response
Do you want to enable SSL configuration for
any of the components? (y/n)? [n]
Do one of the following:
• To accept the default setting (no SSL
configuration), press Return.
• If you want to configure SSL
communications for the Info Server and the
Dual Desktop, enter y.
Note Note the limitations on configuring a DSD
architecture with SSL enabled described
in the “Configuring a DSD Architecture
with SSL Enabled” section on page 6-3.
Configure Info Server failover on Info
Server y/n)? [n]
Press Return to accept the default setting (no
failover).
Do you want to configure this server to be
part of a Dual Desktop Server (DSD)
architecture? (y/n)? [n]
Enter y.
The following messages appear:
INFO: Creating the new Info Server
INFOSERVER
INFO: Generating the databases files..
INFO: Configuring INFOSERVER for DSD
architecture
Is <INFO_SERVER_NAME> the Master Info
Server in the DSD configuration? (y/n)? [y]
This prompt appears if you specify that the Info
Server is to be part of a DSD architecture.
Do one of the following:
• To accept the default setting (the Info Server
that you are configuring on this host, named
INFO_SERVER_NAME will be the Master
Info Server in the DSD architecture), press
Return.
• If the Info Server installed on the will not be
the Master Info Server in the DSD
configuration, enter n.