Filter
Top Products
CHAPTER
14-1
Cisco ONS 15310-CL, ONS 15310-MA, and ONS 15310-MA SDH Ethernet Card Software Feature and Configuration Guide, R9.1 and R9.2
78-19415-01
14
Configuring Access Control Lists on the
ML-Series Card
This chapter describes the access control list (ACL) features built into the ML-Series card and contains
the following major sections:
•
Understanding ACLs, page 14-1
•
ML-Series ACL Support, page 14-1
•
Modifying ACL TCAM Size, page 14-5
Understanding ACLs
ACLs provide network control and security, allowing you to filter packet flow into or out of ML-Series
interfaces. ACLs, which are sometimes called filters, allow you to restrict network use by certain users
or devices. ACLs are created for each protocol and are applied on the interface for either inbound or
outbound traffic. ACLs do not apply to outbound control plane traffic. Only one ACL filter can be
applied per direction per subinterface.
When creating ACLs, you define criteria to apply to each packet processed by the ML-Series card; the
ML-Series card decides whether to forward or block the packet based on whether or not the packet
matches the criteria in your list. Packets that do not match any criteria in your list are automatically
blocked by the implicit “deny all traffic” criteria statement at the end of every ACL.
ML-Series ACL Support
Both control-plane and data-plane ACLs are supported on the ML-Series card:
•
Control-plane ACLs: ACLs used to filter control data that is processed by the CPU of the ML-Series
card (for example, distribution of routing information, Internet Group Membership Protocol (IGMP)
joins, and so on).
•
Data-plane ACLs: ACLs used to filter user data being routed or bridged through the ML Series in
hardware (for example, denying access to a host, and so on). These ACLs are applied to an interface
in the input or output direction using the ip access-group command.
The following apply when using data-plane ACLs on the ML-Series card:
•
ACLs are supported on all interface types, including bridged interfaces.
•
Reflexive and dynamic ACLs are not supported on the ML-Series card.