A-21
Cisco ONS 15310-CL, ONS 15310-MA, and ONS 15310-MA SDH Ethernet Card Software Feature and Configuration Guide, R9.1 and R9.2
78-19415-01
Appendix A Command Reference for the ML-Series Card
spr-intf-id shared-packet-ring-number
spr-intf-id shared-packet-ring-number
Assigns the POS interface to the SPR interface.
Syntax Description
Defaults N/A
Command Modes POS interface configuration
Usage Guidelines
•
The SPR number must be 1, which is the same SPR number assigned to the SPR interface.
•
The members of the SPR interface must be POS interfaces.
•
An SPR interface is configured similarly to a EtherChannel (port-channel) interface. Instead of
using the channel-group command to define the members, you use the spr-intf-ID command. Like
port-channel, you then configure the SPR interfaces instead of the POS interface.
Examples The following example assigns an ML-Series card POS interface to an SPR interface with a
shared-packet-ring-number of 1:
ML_Series(config)# interface pos 0
ML_Series(config-if)# spr-intf-id 1
Related Commands interface spr 1
spr station-id
spr wrap
Parameter Description
shared-packet-ring-number The only valid shared-packet-ring-number (SPR number) is 1.