Filter
Top Products
7 August 2003
Chapter 1 Cisco ONS 15530 Overview
Cisco ONS 15530 Components
1-34
Cisco ONS 15530 Hardware Installation Guide
78-14228-02
Note We strongly recommend configuring port pairs as FC only or GE only. Mixing
FC and GE in a port pair increases the FC signal latency between nodes.
The 8-port FC/GE aggregation card uses single-mode and multimode SFP optics
for the client signals. There are no restrictions on populating the line card with
SFPs. For example, you can mix a single-mode SFP optic with a multimode SFP
optic in the same port pair. Table 1-12 lists features for the SFP optics supported
by the 8-port FC/GE aggregation card.
The Cisco ONS 15530 supports up to four 8-port FC/GE aggregation cards for a
total of 32 client signals.
Table 1-12 8-Port FC/GE aggregation card SFP Optics Features
Part Number Supported Protocols Fiber Type Wavelength
Connector
Type
15500-XVRA-02C1 Gigabit Ethernet
1
, Fibre
Channel (1 Gbps)
2
1. 1000BaseSX
2. FC-0-100-M5-SN-S and FC-0-100-M6-SN-S standards
MM 50/125 m
MM 62.5/125 m
850 nm Duplex LC
15500-XVRA-03B1 Gigabit Ethernet
3
, Fibre
Channel (1 Gbps)
4
3. 1000BaseLX
4. FC-0-100-SM-LC-S standard
SM 9/125 m 1310 nm Duplex LC