Cisco Systems RV130 Network Router User Manual


 
6
Cisco RV130/RV130W Wireless Multifunction VPN Router Administration Guide 99
Configuring VPN
Configuring Site-to-Site IPsec VPN Advanced Parameters, page 101
Configuring IPsec VPN Server, page 105
Configuring PPTP, page 107
VPN Tunnel Types
You can configure VPN on your device to provide you a secure communication
channel or a tunnel between:
Two gateway routers
A remote client device and a gateway router
Configuring Basic Site-to-Site IPsec VPN
Your device supports site-to-site IPsec VPN for a single gateway-to-gateway VPN
tunnel. After configuring these basic VPN settings, you can connect securely to
another VPN-enabled router. For example, you can configure your device at a
branch site to connect to a router that connects site-to-site VPN tunnels at the
corporate site, so that the branch site has secure access to the corporate network.
To configure basic VPN settings for a site-to-site IPsec connection:
STEP 1 Choose VPN > Site-to-Site IPsec VPN > Basic VPN Setup.
STEP 2 In the New Connection Name field, enter a name for the VPN tunnel.
STEP 3 In the Pre-Shared Key field, enter the pre-shared key, or password, that will be
exchanged between the two routers. It must be between 8 and 49 characters.
STEP 4 In the Endpoint Information fields, enter the following information: