Setting Up the Cisco SLM2008 Switch
Navigating the Utility
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 13
4
Multicast
This window displays the multicast settings for the switch.
• IGMP Settings—Configure functions that include Enable IGMP Snooping,
Enable Unregistered IP Multicast Flooding, and Enable IGMP Querying.
Admin
This window allows you to manage the switch.
• Ping—Use to see if another site on the network can be reached.
• Port Mirror—Mirror traffic from any source port to a target port for real-
time analysis.
• Factory Default—Resets the switch to its factory default settings.
• Reboot—Reboots the switch.
• Save Configuration—Saves the current switch configuration.
• Firmware Upgrade—Upgrades the switch’s firmware on this window.