Filter
Top Products
Advanced Configuration
Security
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 29
5
The Security > 802.1X Settings window displays the current 802.1X settings for
the switch.
To configure the 802.1X settings, follow these steps:
STEP 1 Click Security > 802.1X Settings.
STEP 2 In the 802.1X Settings section, enter the following information:
• 802.1X Mode—Enables or disables 802.1X mode. From the drop-down
menu select Enabled or Disabled.
• RADIUS IP—Enter the IP address of the server.
• RADIUS UDP Port—Enter the UDP Port of the server. The UDP port is used
to verify the RADIUS server authentication. The default value is 812.
• Key String—Enter the secret key string as defined on the RADIUS server.
The secret key string is used for authenticating and encrypting
communications between the device and the RADIUS server.