Filter
Top Products
Advanced Configuration
STP
Cisco SLM2008 8-Port Gigabit Smart Switch with PD and AC Power Administration Guide 41
5
STP
This section describes configuring the STP settings.
• Configuring STP Settings, page 41
• Displaying STP Status, page 43
Configuring STP Settings
The Spanning Tree Algorithm (STA) can be used to detect and disable network
loops, and to provide backup links between switches, bridges or routers. This
allows the switch to interact with other bridging devices (that is, an STA-compliant
switch, bridge or router) in your network to ensure that only one route exists
between any two stations on the network, and provide backup links which
automatically take over when a primary link goes down.
The STP > STP Settings window displays the current STP settings.
To configure the STP settings, follow these steps:
STEP 1 Click STP > STP Settings.
STEP 2 Configure the STP settings.