Filter
Top Products
6
7 Connect an ADSL Line
Follow these steps to connect an ADSL to the ADSL over ISDN port on your router:
Step 1 Connect the lavender ADSL cable to the lavender ADSL over ISDN port on the router, as shown in Figure 3. If you have
microfilters or do not have telephone service on the ADSL line, use the lavender CAB-ADSL-RJ11 cable. If you have a
splitter installed, use the lavender CAB-ADSL-RJ11X cable with the blue stripe. One of these two ADSL cables is
supplied with the router. (The cable supplied is the one that was selected during the ordering process.)
Figure 3 Connecting the Router to an ADSL Line
Step 2 Connect the other end of the ADSL cable to the external wall jack.
1
Cisco 827-4V router
2
Wall jack
ETHERNET
CONSOLE
ADSL
4
3
2
1
PH
ON
E
TO HUB
TO PC
1
+5,+12,-12,-24,-71, VDC
Model Cisco 827-4V
2
1