Filter
Top Products
2-13
Cisco 837 Router and SOHO 97 Router Hardware Installation Guide
78-14781-02
Chapter 2 Installation
Installing the Router
Perform the following steps to connect the PC to Ethernet port 4 (or to port 1, 2,
or 3) on the router:
Step 1 Connect one end of the yellow Ethernet cable to Ethernet port 4 on the router.
Step 2 Connect the other end of the yellow Ethernet cable to the RJ-45 port on the NIC
of the PC, server, or workstation.
Note Leave the PCs that you connect to the router turned off until after you complete
router installation.
You can connect additional servers, PCs, or workstations to Ethernet ports 1, 2,
and 3.
To verify the connection, check that the Ethernet 1 LED is on after you complete
the router installation.
Connecting an ADSL Line
The procedure for connecting an ADSL line depends on the router and, in some
cases, on the location. Figure 2-4 shows how to connect the ADSL line to a cable
wall jack. Follow the steps given after Figure 2-4 to connect the ADSL line to a
cable wall jack. (Figure 2-4 depicts a Cisco 837 router, but it also applies to the
SOHO 97 router. The connection procedure applies to both the Cisco 837 router
and the SOHO 97 router.)
Warning
Do not work on the system or connect or disconnect cables during periods of
lightning activity.