Filter
Top Products
show controllers cable-modem mac
Configuring the Cisco uBR900 Series Cable Access Routers 93
CMAC_LOG_RESET_SERVICE_NOT_AVAILABLE
The CMTS has failed the Cisco uBR900 series’
registration because a required or requested class of
service is not available.
CMAC_LOG_RESET_T6_RETRIES_EXHAUSTED
The CMTS failed too many times to respond to a
REG-REQ message.
CMAC_LOG_RESET_MAINTENANCE_WATCHDOG_DRIVER
The Cisco uBR900 series MAC layer failed to detect a
change in the interface driver.
CMAC_LOG_RESET_NET_ACCESS_MISSING
The Network Access parameter is missing from the
DOCSIS configuration file.
CMAC_LOG_RESET_FAILED_WRITE_ACCESS_CONTROL
The Cisco uBR900 series was unable to set the Write
Access Control for an SNMP parameter as specified by
the DOCSIS configuration file.
CMAC_LOG_RESET_DHCP_FAILED
The DHCP server did not respond with all the required
values. The required values are: IP address, network
mask, TFTP server IP address, TOD server IP address,
DOCSIS configuration file name, and time zone offset.
CMAC_LOG_RESET_CANT_START_DS_TUNER_PRCESS
The Cisco uBR900 series was unable to start the internal
process used to manage the downstream tuner.
CMAC_LOG_RESET_TOO_MANY_DS_LOCKS_LOST
Downstream QAM/FEC lock has been lost too many
times.
CMAC_LOG_RESET_NO_SEND_TO_DS_TUNER_PROCESS
The Cisco uBR900 series MAC-layer process was unable
to communicate with the downstream tuner management
process.
CMAC_LOG_RESET_DS_TUNER_WATCHDOG
The downstream tuner process failed to report its
continuing operation for a long period of time.
CMAC_LOG_RESET_UNABLE_TO_SET_MIB_OBJECT
The Cisco uBR900 series was unable to set an SNMP
parameter as specified by the DOCSIS configuration file.
CMAC_LOG_RESET_MIB_OBJECT_PROCESS_WATCHDOG
The internal MIB object took too long to process the
entries in the DOCSIS configuration file.
Table 10 Possible but Uncommon Cable Interface Reset Causes (continued)
Message Description