Filter
Top Products
2-4
Cisco UCS C200 Server Installation and Service Guide
OL-20732-02
Chapter 2 Installing the Server
Preparing for Installation
Rack Requirements
This section provides the requirements for the standard open racks, assuming an external ambient air
temperature range of 32 to 95F (0 to 35C).
The rack must be of the following type:
• Standard 19-inch (48.3-cm) wide, four-post EIA rack, with mounting posts that conform to English
universal hole spacing per section 1 of ANSI/EIA-310-D-1992.
• The rack post holes can be square or round when you use the supplied slide rails.
• The minimum vertical rack space per server must be one rack unit (RU), equal to 1.75 inches
(4.45 cm).
• The distance between the front and rear rack posts must be as follows to fit the Cisco slide rails:
–
For the older rails (R200-1032RAIL), 27 to 37 inches (68.6 to 94.0 cm)
–
For the new style rails (R2XX-G31032RAIL), 23.5 to 36 inches (59.7 to 91.4 cm)
Tip The Cisco R-Series racks and RP-Series PDUs have been designed for optimum performance with Cisco
products and are available from Cisco.
Required Equipment
The slide rails supplied by Cisco Systems do not require any tools for installation, but you might want
to use a tape measure and level to help level the slide rails during installation.
Slide Rail Adjustment Range
The slide rails for this server have an adjustment range of 24 to 36 inches (610 to 914 mm).