Filter
Top Products
1-7
Installation Guide for Cisco Unified Videoconferencing Manager Release 5.6
OL-16908-01
Chapter 1 Installing Cisco Unified Videoconferencing Manager
How to Install Cisco Unified Videoconferencing Manager
Step 4 In the Welcome window, click Next.
Step 5 In the License Agreement window, read the agreement, choose I accept the terms in the license
agreement, and then click Next.
Step 6 In the Customer Information window, enter information for software registration, choose the user access
option for Desktop, and then click Next.
Step 7 In the Cisco Unified Videoconferencing Desktop Desktop Serial Key window, enter the Desktop key
number, and click Next.
Step 8 In the Custom Setup window, define which Desktop components to install on this server, specify the
installation location, and then click Next.
Note The default directory for Cisco Unified Videoconferencing Streaming Server installation is
C:\Program Files\Darwin Streaming Server.
For a single server installation, install both components.
Step 9 In the Cisco Unified Videoconferencing Desktop Network Configuration window, configure the Desktop
Network Interface and Desktop web server port, and click Next.
Step 10 In the Configure Servers window, configure server settings:
a. Enter the IP address of your gatekeeper in the Gatekeeper IP address field.
b. Enter the server’s NIC IP address in the IP address field under Use Cisco Unified
Videoconferencing Manager for moderation.
Alternatively, choose Do not enable moderation to work without a meeting control server in a
multiple Cisco Unified Videoconferencing 3545 MCU deployment. If you use Cisco Unified
Videoconferencing Manager as your meeting control server, enter the Cisco Unified
Videoconferencing Manager IP address in the IP address of Cisco IOS H.323 Gatekeeper field
so that Desktop uses the Cisco Unified Videoconferencing Manager internal gatekeeper.
Note You must use the specific IP addresses, not loopback addresses.
Step 11 In the Configure Streaming window, choose a server to manage streaming:
a. When your deployment includes multiple Desktop servers, you must define which one of your
Desktop servers is enabled for streaming.
Choose This Cisco Unified Videoconferencing Desktop will be used to manage streaming
services to define the Desktop server that you are currently configuring as the Desktop server
that is enabled for streaming.
Note We recommend that you choose only one Desktop server to be a streaming server.
If you install the Cisco Unified Videoconferencing Streaming Server on a separate server, type
the IP address of that server in the Darwin Streaming Server IP address field.
b. When your deployment includes multiple Desktop servers, and you do not want to define the
Desktop server that you are currently configuring as the Desktop server that is enabled for
streaming, choose Use an alternative Cisco Unified Videoconferencing Desktop to manage
streaming services.
Type the Fully Qualified Domain Name (FQDN) of the Desktop server that is enabled for
streaming in the Server URL field.