Cisco Systems 831 Network Router User Manual


 
© 2005 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 10 of 16
N1-OSPF NSSA external type 1, N2-OSPF NSSA external type 2
E1-OSPF external type 1, E2-OSPF external type 2
i-IS-IS, su-IS-IS summary, L1-IS-IS level-1, L2-IS-IS level-2
ia-IS-IS inter area, *-candidate default, U-per-user static route
o-ODR, P-periodic downloaded static route
Gateway of last resort is 192.168.2.1 to network 0.0.0.0
10.0.0.0/24 is subnetted, 2 subnets
C 10.0.150.0 is directly connected, FastEthernet0/0
S 10.0.149.0 [1/0] via 10.0.150.207
C 192.168.16.0/24 is directly connected, Ethernet0/0
C 192.168.1.0/24 is directly connected, Tunnel0
C 192.168.2.0/24 is directly connected, Tunnel1
o* 0.0.0.0/0 [160/1] via 192.168.2.1, 00:00:25, Tunnel1
[160/1] via 192.168.1.1, 00:00:56, Tunnel0
c1751-16#show crypto session detail
Crypto session current status
Code: C-IKE Configuration mode, D-Dead Peer Detection
K-Keepalives, N-NAT-traversal, X-IKE Extended Authentication
Interface: Tunnel0
Session status: UP-ACTIVE
Peer: 10.0.149.221 port 500 fvrf: (none) ivrf: (none)
Phase1_id: 10.0.149.221
Desc: (none)
IKE SA: local 10.0.150.1/500 remote 10.0.149.221/500 Active
Capabilities:D connid:268435501 lifetime:20:51:40
IPSEC FLOW: permit 47 host 10.0.150.1 host 10.0.149.221
Active SAs: 2, origin: crypto map
Inbound: #pkts dec’ed 7179 drop 0 life (KB/Sec) 4607231/2896
Outbound: #pkts enc’ed 65223 drop 1 life (KB/Sec) 4607249/2896
Interface: Tunnel1
Session status: UP-ACTIVE
Peer: 10.0.149.220 port 500 fvrf: (none) ivrf: (none)
Phase1_id: 10.0.149.220
Desc: (none)
IKE SA: local 10.0.150.1/500 remote 10.0.149.220/500 Active
Capabilities:D connid:268435500 lifetime:17:04:05
IPSEC FLOW: permit 47 host 10.0.150.1 host 10.0.149.220
Active SAs: 2, origin: crypto map
Inbound: #pkts dec’ed 6767 drop 0 life (KB/Sec) 4541812/2908
Outbound: #pkts enc’ed 65226 drop 4 life (KB/Sec) 4541830/2908
c1751-16#show ip protocols
Routing Protocol is “nhrp”
Maximum path: 0
Routing Information Sources: