Cisco Systems 831 Network Router User Manual


 
© 2005 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 6 of 16
IPSEC FLOW: permit 47 host 10.0.149.221 host 10.0.150.2
Active SAs: 2, origin: crypto map
Inbound: #pkts dec’ed 6757 drop 0 life (KB/Sec) 4427309/2860
Outbound: #pkts enc’ed 65162 drop 1 life (KB/Sec) 4427290/2860
c3725-21#show ip protocols
Routing Protocol is “nhrp”
Maximum path: 0
Routing Information Sources:
Gateway Distance Last Update
Distance: (default is 0)
Routing Protocol is “eigrp 1”
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is not set
Default networks flagged in outgoing updates
Default networks accepted from incoming updates
EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0
EIGRP maximum hopcount 100
EIGRP maximum metric variance 1
Redistributing: eigrp 1, odr
EIGRP NSF-aware route hold timer is 240s
Automatic network summarization is not in effect
Maximum path: 4
Routing for Networks:
192.168.1.0
192.168.20.0
Routing Information Sources:
Gateway Distance Last Update
Gateway Distance Last Update
192.168.20.20 90 3d03h
Distance: internal 90 external 170
Routing Protocol is “odr”
Sending updates every 60 seconds, next due in 37 seconds
Invalid after 180 seconds, hold down 0, flushed after 240
Outgoing update filter list for all interfaces is not set
Incoming update filter list for all interfaces is 101
Maximum path: 4
Routing Information Sources:
Gateway Distance Last Update
192.168.1.11 160 00:00:27
192.168.1.10 160 00:00:41
Distance: (default is 160)
c3725-21#show interface tunnel 0
Tunnel0 is up, line protocol is up