© 2005 Cisco Systems, Inc. All rights reserved.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Page 15 of 16
cdp enable
tunnel source Ethernet1
tunnel destination 10.0.149.220
tunnel key 100001
tunnel protection ipsec profile SDM_Profile2
!
interface Ethernet0
ip address 192.168.27.1 255.255.255.0
!
interface Ethernet1
ip address dhcp
duplex auto
!
ip classless
ip route 10.0.149.0 255.255.255.0 dhcp
!
end
RELATED INFORMATION
• IPsec Support Page
• An Introduction to IPsec Encryption
• Configuring On-Demand Routing, Release 12.2 Configuration Guide
• Designing Large-Scale Stub Networks with ODR, Document ID: 13710
• Configuring IPsec Network Security
• Configuring Internet Key Exchange Security ProtocolTechnical Support-Cisco Systems
• Technical Support—Cisco Systems