Filter
Top Products
14
Catalyst 6000 Family Multilayer Switch Feature Card 2 Installation Note
78-10605-03
Related Documentation
This example shows the output of the show module command:
Console> show module
Mod Slot Ports Module-Type Model Status
--- ---- ----- ------------------------- ------------------- --------
1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE ok
15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 ok
2 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE ok
16 1 1 Multilayer Switch Feature WS-F6K-MSFC2 standby
.
<display text omitted>
.
Console>
Related Documentation
For additional information on Catalyst 6000 family switches and command-line interface (CLI)
commands, refer to the following publications:
• Regulatory Compliance and Safety Information for the Catalyst 6000 Family Switches
• Catalyst 6000 Family Installation Guide
• Catalyst 6000 Family Module Installation Guide
• Catalyst 6000 Family Software Configuration Guide
• Catalyst 6000 Family Command Reference
• Catalyst 6000 Family IOS Software Configuration Guide
• Catalyst 6000 Family IOS Command Reference
• System Message Guide—Catalyst 6000 Family, Catalyst 5000 Family, Catalyst 4000 Family,
Catalyst 2926G Series, Catalyst 2948G, and Catalyst 2980G Switches
• Site Preparation and Safety Guide
Obtaining Documentation
The following sections provide sources for obtaining documentation from Cisco Systems.
World Wide Web
You can access the most current Cisco documentation on the World Wide Web at the following sites:
• http://www.cisco.com
• http://www-china.cisco.com
• http://www-europe.cisco.com