Filter
Top Products
55
Appendixes
Item Description
Printing Printing method Thermal transfer/Direct thermal
Resolution Main scanning line density: 203 dots/inch (8 dots/mm) (CL-S621)
300 dots/inch (11.8 dots/mm) (CL-S631)
Sub- scanning line density: 203 dots/inch (8 dots/mm) (CL-S621)
300 dots/inch (11.8 dots/mm) (CL-S631)
Head 864 dots (printable dots: 832 dots) (CL-S621)
Head 1275 dots (printable dots: 1240 dots) (CL-S631)
Max. print width 104 mm (CL-S621) 4.1 inch
10 5 mm (CL-S631)
Max. print length 812.8 mm 32 inch
Print density Print density is adjustable with software
Printing speed Printing speed setting [For CL-S621]
6, 5, 4, 3 or 2 inches per second (Direct thermal)
4, 3 or 2 inches per second (Thermal transfer)
• 4, 3 or 2 inches per second when the optional peeler is used.
[For CL-S631]
4, 3 or 2 inches per second
Print mode Batch mode Normal printing (single or multiple sheets)
Tear off mode Feeds back media to the tear-off position after printing is completed.
Cut mode
*1
Prints while cutting at designated sheet units.
The following two kinds of cut mode operations are done.
• Backfeed
• Cut through
(Cut through refers to stopping present printing to cut the previous label
when it reaches the cut position. After cutting, printing restarts but a gap
may be created at the seam of the printing at this time.)
Peel mode
*1
Peels labels from the liners after printing them.
Media Types of media Roll, fanfold
(continuous media, die-cuts, continuous tags. paper or tickets)
Recommended media Thermal transfer: label media (RPR-W Ricoh)
Direct thermal media: label media (150LA-1 Ricoh), tag media (TB2E0V,
Mitsubishi Paper)
Max. media width 118.0 mm 4.65 inch
Min. media width 19.5 mm 0.77 inch
Min. label width 19.5 mm 0.77 inch
Min. label pitch
*2
6.35 mm 0.25 inch
Max. media thickness 0.254 mm 0.01 inch
Max. media length 812.8 mm 32 inch
Min. media length 6.35 mm 0.25 inch
Min. media thickness 0.0635 mm 0.0025 inch
On-board roll media Max. external diameter: 127mm 5 inch
diameter
Media core: 25.4 to 76 mm 1 to 3 inch
Ribbon Recommended ribbon B110A Ricoh
Max. ribbon width 114.0 mm 4.50 inch
Min. ribbon width 25.4 mm 1.00 inch
Max. ribbon length 360.0 m 1,181 ft
Max. roll diameter 74.0 mm 2.90 inch
Inner diameter of the 25.4 ± 0.25 mm 1.00 ± 0.01 inch
paper core
Ribbon end tape length Max. 80.0 mm 3.15 inch
Ribbon end detection Ribbon out detection by a tension sensor
Specifications
Appendixes