Citizen CL-S700R Label Maker User Manual


 
3
Printer Adjustments
60
2. Easy-to-slip ribbon and media
If a message ‘Ribbon Out’ is shown, set the mark on the feeding
section to LOW by turning the adjust-screw.
TENSION
STANDARD
LOW
TENSION
STANDARD
LOW
SUPER LOW
Feeding section
Winding section
3. Especially-easy-to-slip ribbon and media
If a message ‘Ribbon Out’ is still shown, although Step 2 has
been performed, set the mark on the feeding section to SUPER
LOW by turning the adjust-screw.
4. When ribbon is broken during printing
Ribbon may be broken if it is narrow in width and printhead
heat temperature is high. In that case, set the mark on the
feeding section to SUPER LOW and set the mark on the winding
section to LOW by turning adjust-screw respectively.
Note: If the problem is still not resolved, please contact our service
personnel.
TENSION
STANDARD
LOW
TENSION
STANDARD
LOW
SUPER LOW
Feeding section
Winding section
TENSION
STANDARD
LOW
TENSION
STANDARD
LOW
SUPER LOW
Feeding section
Winding section
Adjusting the Ribbon