Citizen CT-S651 Printer User Manual


 
—39—
Individual setting mode
Set the memory switches individually.
Do the settings while confirming the memory switch function and settings on
the printout.
1. Load paper.
2. While the paper cover is open, press and hold the FEED button while turning the
power on.
3. Press the FEED button twice and close the paper cover.
The printer enters the mode for setting memory switches individually.
The printer prints “Memory SW (1)” and the current setting, 0 (off) or 1 (on).
(The current settings for memory switches 7 to 10 are not printed.)
4. Press the FEED button.
The list of memory switches cycles through in order from “Memory SW (1)”
“Memory SW (2)” ... “Memory SW (10)” “Save To Memory” “Memory SW
(1)” each time the FEED button is pressed.
Press the FEED button until the number for the memory switch you want to change is
printed.
Selected item
Automatic memory switch settings
Manufacturer Model
Paper
width
Character
space
MSW2-4
Full Col
Print
MSW3-7
CBM1000
Mode
MSW8-1
Print
Width
MSW6-2
Character
Space
CITIZEN CBM1000 58 mm Auto
linefeed
Valid 432dots
80 mm Auto
linefeed
Valid 576dots
CT-S300 58 mm WaitData Invalid 384dots
80 mm WaitData Invalid 576dots
CT-S2000 58 mm Auto
linefeed
Valid 432dots
60 mm Auto
linefeed
Valid 436dots
80 mm Auto
linefeed
Valid 576dots
83 mm Auto
linefeed
Valid 640dots
EPSON T88 58 mm 0dot WaitData Invalid 360dots 0dot
1dot WaitData Invalid 390dots 1dot
80 mm 0dot WaitData Invalid 512dots 0dot
1dot WaitData Invalid 546dots 1dot
203dpi 58 mm WaitData Invalid 420dots
60 mm WaitData Invalid 436dots
80 mm WaitData Invalid 576dots
Current memory switch
Current setting