Filter
Top Products
—42—
Notes:
*1: If print data is very dense, the print head is hot, data transmission is slow, or some other
conditions, the motor and printing may occasionally stop which causes white stripes in the
printout. To print high-density data, set MSW2-3 (Spool Print) to ON to reduce striping, although
this increases the time before printing starts.
For a serial interface, increase the transmission speed to prevent the motor from stopping.
*2: The values for memory switches MSW7-X are only effective when DIP switch no. 1 is set to OFF.
MSW6-1 Act. For Driver
Invalid Valid
MSW6-2 Character Space
Invalid Valid
MSW6-3 Reserved
Fixed —
MSW6-4 Reserved
Fixed —
MSW6-5 Reserved
Fixed —
MSW6-6 Reserved
Fixed —
MSW6-7 Reserved
Fixed —
MSW6-8 Reserved
Fixed —
Switch no. Function Initial setting Setting value
*2 MSW7-1 Baud Rate 9600 bps 1200 bps, 2400 bps, 4800 bps, 9600 bps, 19200 bps,
38400 bps, 57600 bps, 115200 bps
*2 MSW7-2 Data Length 8bits 7bits, 8bits
*2 MSW7-3 Stop Bit 1bit 1bit, 2bits
*2 MSW7-4 Parity NONE NONE, EVEN, ODD
*2 MSW7-5 Flow Control DTR/DSR DTR/DSR, XON/XOFF
*2 MSW7-6 DMA Control Valid Valid, Invalid
*2 MSW7-7 VCom Protocol PC Setting PC Setting, DTR/DSR, XON/XOFF
MSW8-1 Print Width
576dots
(3-inch type)
384dots
(2-inch type)
640dots, 576dots, 512dots, 436dots, 432dots,
420dots, 384dots, 360dots, 390dots, 546dots,
390dots, 546dots
MSW8-2 Paper Type
1 Color
Normal
1 Color Normal, 2 Color Normal
MSW9-1 Code Page
PC 437 PC 437, Katakana, PC 850,858, PC 860, PC 863,
PC 865, PC 852, PC 866, PC 857, WPC1252,
Space page, PC 864, Thai Code 18
MSW9-2 Int’Char Set
USA USA, France, Germany, England, Denmark,
Sweden, Italy, Spain, Japan, Norway, Denmark 2,
Spain 2, Latin America, Korea, Croatia, China
MSW9-3 Kanji
OFF ON, OFF
MSW9-4 JIS/Shift JIS
JIS JIS, Shift JIS
MSW10-1 Print Density
100 % 70 %, 75 %, 80 %, 85 %, 90 %, 95 %, 100 %, 105 %,
110 %, 115 %, 120 %, 125 %, 130 %, 135 %, 140 %
MSW10-2 Print Speed
Level 9 Level 1, Level 2, Level 3, Level 4, Level 5, Level 6,
Level 7, Level 8, Level 9
MSW10-3 ACK Timing
Before Busy Before Busy, Same Period, After Busy
MSW10-4 Reserved
MSW10-5 Reserved
MSW10-6 Buzzer Sound
Tone 2 Tone 1, Tone 2, Tone 3, Tone 4
Switch no. Function OFF ON